What is the role of Notified Body 1462 in this process?

As Notified Body 1462 , COCH performs supervised product checks at random intervals. We verify the quality of your internal inspections by examining samples of finished pressure equipment at your production or storage sites.

Which equipment categories can be assessed under Module A2?

Module A2 is typically applied to pressure equipment in category II according to Directive 2014/68/EU. It is an accepted alternative to modules D1 or E1.

How long should the technical documentation be stored?

The manufacturer must keep the technical documentation and the EU declaration of conformity at the disposal of national authorities for 10 years after the pressure equipment has been placed on the market.

What is the difference between Module A2 and Module A1?

Module A1 requires the Notified Body to supervise only the final assessment stage. Module A2 goes further — the Notified Body additionally performs random, unannounced checks throughout production, not only at the end. Module A2 therefore provides stronger continuous quality assurance for category II pressure equipment and is an accepted alternative to modules D1 and E1.

What documents does the manufacturer receive after Module A2 assessment?

After a successful Module A2 assessment, the manufacturer may affix the CE marking and the identification number of Notified Body 1462 . The manufacturer prepares and signs the EU Declaration of Conformity . COCH issues a report documenting the supervised checks. The declaration and technical documentation must be retained for 10 years.

Is Module A2 mandatory or can the manufacturer choose another module?

Module A2 is one of several conformity assessment modules permitted under Directive 2014/68/EU. For category II equipment the directive lists allowed modules — A2 is one option and an accepted alternative to D1 and E1. The manufacturer selects a legally permitted module; COCH can advise during the initial consultation.

Pressure vessel inspection under PED Module A2 — COCH notified body NB 1462

Pressure Equipment – Module A2

Internal production control plus supervised pressure equipment checks at random intervals according to Directive 2014/68/EU.

Contact Documents & links About the service

AK 044

1462

AK 044

PCA accreditation

NB 1462

Notified Body

Module A2

Assessment module

80+ years

In HVACR

What is Module A2 under Directive 2014/68/EU?

Module A2 is a conformity assessment procedure in which the manufacturer fulfils the obligations in Directive 2014/68/EU and ensures, on its sole responsibility, that the pressure equipment meets the applicable requirements.

The Notified Body performs supervised checks to verify the quality of internal final assessments. COCH Kraków acts as EU Notified Body No. 1462 and holds PCA inspection body accreditation AK 044 (EN ISO/IEC 17020).

Inspection services cover conformity assessment under the Pressure Equipment Directive (PED). We specialise in Module A2 inspections — internal production control plus supervised checks of pressure equipment at random intervals — from technical documentation review through product tests to detailed inspection reports.

What does Module A2 cover?

Key elements of the Module A2 conformity assessment procedure for category II pressure equipment.

Technical documentation

The manufacturer prepares documentation enabling conformity assessment, including risk analysis and, as far as needed for assessment, design, manufacture and operation of the pressure equipment.

Production control

The manufacturer takes all measures so that the manufacturing process and its monitoring ensure conformity of manufactured pressure equipment with the technical documentation and Directive 2014/68/EU.

Final assessment & random visits

The manufacturer performs final assessment monitored through unannounced visits by the notified body, which examines products at irregular intervals to verify the quality of internal checks.

CE marking & EU Declaration of Conformity

After successful assessment the manufacturer affixes CE marking and the NB identification number, draws up the EU DoC and keeps it with the technical file for 10 years after placing on the market.

Technical documentation — minimum contents

Where applicable, the technical documentation contains at least the following elements:

General description of the pressure equipment
Conceptual design and manufacturing drawings and diagrams of components, sub-assemblies, circuits, etc.
Descriptions and explanations necessary for understanding those drawings and diagrams and the operation of the pressure equipment
A list of harmonized standards applied in full or in part, and descriptions of solutions adopted to meet the essential safety requirements where those harmonized standards have not been applied; partly applied standards must be indicated
Results of design calculations made, examinations carried out, etc.
Test reports

During unannounced visits the notified body:

Ensures that the manufacturer actually performs the final assessment in accordance with Annex I point 3.2 PED
Takes samples of pressure equipment at production or storage premises for control purposes and decides whether all or part of the final assessment test must be carried out

The objective of sampling is to determine whether the production process stays within acceptable limits ensuring conformity. In case of non-conformity the notified body takes appropriate measures. The manufacturer, under the responsibility of the notified body, affixes the NB identification number during manufacturing.

CE marking and EU Declaration of Conformity

The manufacturer affixes CE marking on each pressure equipment unit that meets the applicable requirements of the Directive.
The manufacturer draws up a written EU Declaration of Conformity for one pressure equipment model and keeps it with the technical documentation for 10 years after placing on the market. The DoC must clearly identify the equipment covered.
A copy of the EU Declaration of Conformity is made available to the competent authorities on request.

Module A2 assessment procedure

From application through supervised checks to CE marking and ongoing surveillance.

Overview of the main stages — hover or tap a step for details.

1Application & documentation

Submit the Module A2 application with technical documentation enabling conformity assessment, including risk analysis and design/manufacture/operation data as required.

Documents, applications and links

Download application forms and guidelines for Module A2 pressure equipment assessment.

Forms and downloads

Online application and traditional forms for Module A2.

Send completed documents to inspekcja@coch.pl

Fees

Information on fees for Module A2 assessment can be obtained individually. Please send your inquiry to: inspekcja@coch.pl

Appeals and complaints

Information on the complaints and appeals procedure for the Inspection Body is available here: Complaints and appeals

Application procedure

1Fill out the Module A2 application form (online or downloadable).
2Submit documentation to inspekcja@coch.pl.
3Agreement execution and technical review.
4Execution of supervised manufacturing checks.

Need assistance?

Contact our inspection experts for guidance on module selection and documentation preparation.

+48 12 637 09 33 inspekcja@coch.pl

Related services

Approval of permanent joining procedures

PED welding/brazing procedure approval by Notified Body 1462.

ATP manufacturing plant inspection

Production control of thermally insulated transport equipment.

Refrigeration & heat pump plant assessment

Production control of HVACR manufacturing plants.

CE conformity assessment

Broader CE marking support under EU directives.

Frequently asked questions

Technical and procedural details regarding Module A2 under PED 2014/68/EU.

The manufacturer must implement an internal production control system, prepare technical documentation, and ensure that the production process guarantees equipment conformity. They must also allow the Notified Body to perform unannounced visits and random product checks.

Accreditation AK 044 – PCA & Notified Body 1462

COCH Inspection Body holds AK 044 accreditation confirming conformity to ISO/IEC 17020, and acts as EU Notified Body No. 1462.

1462

PCA · IAF MLA · NOTIFIED BODY 1462

Accredited Inspection Body AK 044

As a specialised Inspection Body (AK 044) and Notified Body No. 1462, we provide technical oversight for pressure equipment. Accreditation ensures impartiality, competence and consistent operation to international safety standards.

Accreditation documents